Gijs47

Arakasi, This weekend I tried everything you suggested me in the above answers. I removed even ESET to 'unlock' the windows firewall and set the configuration of that firewall to standard. I switched the network from Home to Public and back again. I used several other anti virus scanners. I removed them very careflly using special removal software. I cleaned my registry and read the other topics you pointed me to very carefully and tried also the suggestions over there. I decided to follow the other topic as well. Yesterday evening the solution that helped me was posted in that topic: remove the wifi adapter including the drivers and reboot. After that the adapter was detected again and the drivers installed and it worked !!!!!!!!!!!! :D I saw that yoy had read the topic as well. I like to thank you very much for your answers, your suggestions and your patience. You were very helpfull and I have learned a lot. Thanks ! Gijs

Yes it did help me thx a lot !!!!

I have to return to your first few posts where you stated disabling eset firewall resolved your issue with the delayed start ? I have seen and heard of this issue before with the delayed internet, but not sure on end resolution. https://forum.eset.com/topic/702-eset-ss-v6-delays-my-internet/ If I disable the firewall the problem still exist, but I saw something else. I checked after disabling the ESET firewall what the status of the windows firewall was. I can't control the windows firewall nor switch it off because the Windows Firewall is under control of the ESET firewall. So I could not check or edit the settings of the Windows firewall. Strange because in the ESET control center you think you switch off the total firewall of the computer., which seems not to be the case. So I think I have to remove the ESET software to check the windows firewall settings ? I'm 'glad' I am not the only one with problems w.r.t ESET Smart security version 7. I will investigate your other suggestions and let you know. Thx again

I solved this problem by switching off the desktop, nas and printer. After that I could still ping to the above mentioned address. after some investigation I detected that it was my Blackberry Playbook tablet, which uses the same network name WORKGROUP. I found the cause in hxxp://www.techspot.com/community/topics/system-care-virus.193183/ where is stated 6/10/13 9:35:19 AM, Error: NetBT [4321] - The name "WORKGROUP :1d" could not be registered on the interface with IP address 172.16.1.72. The computer with the IP address 172.16.1.63 did not allow the name to be claimed by this computer. 6/10/13 9:19:09 AM, Error: bowser [8003] - The master browser has received a server announcement from the computer PLAYBOOK-33B2 that believes that it is the master browser for the domain on transport NetBT_Tcpip_{FE013E0B-8083-42B3-B089-0DB930D9B872}. The master browser is stopping or an election is being forced. 6/10/13 7:26:49 AM, Error: BROWSER [8020] - The browser was unable to promote itself to master browser. The computer that currently believes it is the master browser is unknown. So I think this NetBT error is solved. I can change the networkname of my playbooktablet

Hi Arakasi, Thank you that you will help me further with my problems I did run the program and the results can be found in the attached file. I see no problems. The scan is made after my delayed logon, I waited a few minutes before entering my password. If you need another scan like incase of a 'normal' logon let me know I found in the logbook another thing a fault reported by NetBT every 5 minutes starting at login time Event 4321 De naam WORKGROUP :1d kan niet op de interface met het IP-adres 192.168.178.14 worden geregistreerd. De computer met het IP-adres 192.168.178.16 staat niet toe dat deze naam door deze computer wordt gebruikt. I will try to translate it: The name WORKGROUP :1d can not be registered at the interface with IP address 192.168.178.14 (my laptop). The computer with IP-address 192.168.178.16 does not allow that this name is used by this computer Gijs FSS.txt

By accident I discovered what causes all the trouble but I don't have a solution right now. My laptop is password protected. Today I started my laptop and I could not logon immidiately, So after 5 minutes I could fill in my password and after that the computer had internet instantly and my networkshares were all there and I could acces them. I restarted the laptop again and made the logon directly and I saw that the wifi connection was starting up very very slowly . First of all windows was searching foor a wifi connection for about 1.5 minutes and after my modem was found it said "restricted access" for another 2 minutes. Then it started the identification. I think that the script for the networkconnection was already running in those minutes but couldn't find a network. So I don't think it is a network problem but a wifi problem, although connecting the laptop wired to my modem and disconnecting the wifi gives the same behaviour, i.e. it took a long time before the connection is established. Maybe I have to switch my question to another forum unless you can help me

You renamed the sharename in a sharename without a space in it. That's the easy way and it works even without quotes, because I have also shares without spaces in the name. But I can't use that trick because the sharename is used in several programs and backups so I don't want to change the name

hello i was some time on holiday so it took a lng time for my answer. The triple (double) quotes don't work either. I tried double quotes an d singel quotes, but the space between Mijn and Doucmnet (My Documents) causes the trouble

First of all my NAS has a fixed ip address. I can see that it works for a single word share like Web and Download but I have no solution for a two words share like My Documents. I tried to use quotes and double quotes but that does not work. The connections are deleted but no longer displayed in Computer. I detected a strange thing. I have made shortcuts to my connections on my desktop, also for Mijn Documenten and Mijn Afbeeldingen. If I rightclick on that shortcut the connection immediately appears in Computer and can be used. So I think the connection is still there but is not displayed. Any idea ?

hello I tried your solution for one connection and it didn't work Then I searched on the net for the command: net use And now I have found part of the solution: { @echo off net use S: /delete net use S: \\DISKSTATION\public wachtwoord:****** /persistent:yes net use V: /delete net use V: \\DISKSTATION\public\Mijn Afbeeldingen wachtwoord:****** /persistent:yes net use W: /delete net use W: \\DISKSTATION\public\Web wachtwoord:****** /persistent:yes net use X: /delete net use X: \\DISKSTATION\public\Mijn Documenten wachtwoord:****** /persistent:yes net use U: /delete net use U: \\DISKSTATION\public\Downloads password:****** /persistent:yes } I read that you don't have to use a username because Windows assumes the current user as the user. The password (wachtwoord in dutch) is no longer used behind a backslash but directly after the share name. It works only for shares with a single name like Web, Downloads and the whole NAS (S:) But not for the shares like MIjn Documenten (My Documents) and Mijn Afbeeldingen (My Pictures) Any idea how to solve the space in the share name ?

Hi I tried your suggestion making a bat file. I can trace that the connection is deleted and setup again but the result is the same: After a (re)boot of my computer and after the network seems to be established I still have in Computer on my desktop my networklocations with a red cross through it. If I double click on such a connection it opens and shows me the content of the share. Normally a program that uses that share could directly connect to that share, but since the red crosses I first have to double click in order to remove the red cross and open the connection

Hello I didn't have that much time today but I made a small experiment. I removed ESS and installed AVG free with the Windows firewall and I had no problems at all. Later this week I wil try your suggestions

Hi, Thanks for your quick response. I have a couple of questions. Where can I find my startup folder Where is de x: standing for In the second command line is there a space between user and password ? Gijs

Hello I'm new here and I have a problem since installing ESS7 on my windows 7 computers. It has to do with my NAS connection. I have a network with a laptop, a desktop and a NAS (Synology) I have made some network connections in Computer with my NAS in order to find some parts like My Documents My Pictures and Downloads very quickly on my NAS. In ESS 6 if I started up my computer the network connections were found and I could use them. In ESS7 I see in Computer all my network connections with my NAS with a red cross through it. I have to double click on the connection in order to make them connect to the NAS I switched off the firewall in ESS 7 and then after a refresh everything was normal. I switched off the firewall of ESS and restarted the system and everything was quite normal. So it has something to do with the built-in firewall of ESS. Has somebody any idea. And am I still protected by the Windows firewall while switching off the ESS firewall ? Gijs