Jump to content

Sandisk SSD failing to boot after FDE


Leon Symnz
 Share

Recommended Posts

Hello,

We have come across an issue that seems to only affect Sandisk SSD's.

Once windows is installed, we perform a FDE without TPM on the HDD or SSD, in this case, a SSD. Once the encryption is done, once we shut down the laptop or PC and try to turn it back on, it will not detect the drive. 
(we have not tested these drives with a device that supports TPM yet so cannot comment on if that would work or not)
 
It doesn't matter if we boot with UEFI or Legacy, it won't boot.
This only happens after the FDE. This affects all our devices, different brands and models.
We have the up-to-date BIOS on all devices I've tested. To list a few:
Dell Vostro 3559
Dell Vostro 3568
HP Probook G5
HP Elitebook
 
The specific SSD is Sandisk SDSSDP-064G and Sandisk SDSSDP-128G
I have tried 4x the 64GB and 1x the 128GB. All 5 have failed.
 
I couldn't find this issue reported elsewhere. It's not a big problem, we can just use another brands but does limit us to availability. 
Link to comment
Share on other sites

  • ESET Staff

Hi @Leon Symnz

Unfortunately we are unable to diagnose this issue via the Forum, therefore would you mind submitting a Support Case via the following link: https://www.eset.com/uk/about/contact/ with all of the details you have provided as well as the following Diagnostic Log: https://support.eset.com/en/kb7123-eset-endpoint-encryption-diagnostics-utility for one or some of the machines affected by this issue.

Thank you.

Kieran

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...