Jump to content

Recommended Posts

Posted (edited)

Hello Eset team

I have observed in the last weeks that the updates are being carried out, but no longer appear in the logs that were installed successfully, where it was in bold.

I also realize that these error messages below are constant and would like to know what you can do to resolve them.

I have already sent a report to Eset support, but I did not get an answer.

The messages are as follows: Error Messages log files 

**************************************************************

Olá equipe Eset

Tenho observado nas ultimas semanas que as atualizações estão sendo realizadas, mas não aparecem mais nos logs que foram instaladas com sucesso, onde ficava em negrito.

Também percebo que estas mensagens de erro abaixo são constantes e gostaria de saber o que é possível fazer para resolve-las.

Já enviei uma relatório para o suporte da Eset, mas não obtive resposta.

As mensagens são as seguintes: Error Messages log files - Mensagens de Erro arquivos de log

07/11/2018 14:50:19    Preload library access control    Unknown opened directory on descriptor 289    
07/11/2018 14:50:19    Preload library access control    Unknown opened directory on descriptor 296    
07/11/2018 14:50:19    Preload library access control    Unknown opened directory on descriptor 289    
07/11/2018 14:50:19    Preload library access control    Unknown opened directory on descriptor 296    
07/11/2018 14:50:19    Preload library access control    Unknown opened directory on descriptor 289    
07/11/2018 14:50:17    Preload library access control    Unknown opened directory on descriptor 314    
07/11/2018 14:50:17    Preload library access control    Unknown opened directory on descriptor 305    
07/11/2018 14:50:17    Preload library access control    Unknown opened directory on descriptor 314    
07/11/2018 14:50:17    Preload library access control    Unknown opened directory on descriptor 305    
07/11/2018 14:50:17    Preload library access control    Unknown opened directory on descriptor 314    
07/11/2018 14:50:17    Preload library access control    Unknown opened directory on descriptor 305    
07/11/2018 14:50:17    Preload library access control    Unknown opened directory on descriptor 314    
07/11/2018 14:50:17    Preload library access control    Unknown opened directory on descriptor 331    
07/11/2018 14:50:17    Preload library access control    Unknown opened directory on descriptor 314    
07/11/2018 14:50:17    Preload library access control    Unknown opened directory on descriptor 331    
07/11/2018 14:46:03    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 14:45:32    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 14:45:14    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 14:44:50    Media control access    Cannot unblock removable media (org.freedesktop.udisks2.filesystem-mount)    
07/11/2018 14:43:41    ESET Daemon    Cannot read from socket: Connection reset by peer    
07/11/2018 14:43:41    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 14:41:16    Preload library access control    Unknown opened directory on descriptor 143    
07/11/2018 14:41:16    Preload library access control    Unknown opened directory on descriptor 317    
07/11/2018 14:41:16    Preload library access control    Unknown opened directory on descriptor 143    
07/11/2018 14:41:16    Preload library access control    Unknown opened directory on descriptor 317    
07/11/2018 14:41:16    Preload library access control    Unknown opened directory on descriptor 143    
07/11/2018 14:41:16    Preload library access control    Unknown opened directory on descriptor 317    
07/11/2018 14:41:16    Preload library access control    Unknown opened directory on descriptor 143    
07/11/2018 14:41:16    Preload library access control    Unknown opened directory on descriptor 317    
07/11/2018 14:41:16    Preload library access control    Unknown opened directory on descriptor 143    
07/11/2018 14:39:35    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 14:39:04    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 14:38:40    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 14:38:17    Media control access    Cannot unblock removable media (org.freedesktop.udisks2.filesystem-mount)    
07/11/2018 14:36:50    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 14:03:26    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 14:02:55    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 14:02:35    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 14:02:14    Media control access    Cannot unblock removable media (org.freedesktop.udisks2.filesystem-mount)    
07/11/2018 14:01:13    ESET Daemon    Cannot read from socket: Connection reset by peer    
07/11/2018 14:01:13    ESET Daemon    Cannot read from socket: Connection reset by peer    
07/11/2018 14:01:13    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 13:45:52    Preload library access control    Unknown opened directory on descriptor 240    
07/11/2018 13:45:52    Preload library access control    Unknown opened directory on descriptor 207    
07/11/2018 13:45:52    Preload library access control    Unknown opened directory on descriptor 240    
07/11/2018 13:45:52    Preload library access control    Unknown opened directory on descriptor 207    
07/11/2018 13:45:52    Preload library access control    Unknown opened directory on descriptor 240    
07/11/2018 13:45:52    Preload library access control    Unknown opened directory on descriptor 207    
07/11/2018 13:45:52    Preload library access control    Unknown opened directory on descriptor 240    
07/11/2018 13:45:52    Preload library access control    Unknown opened directory on descriptor 240    
07/11/2018 13:45:52    Preload library access control    Unknown opened directory on descriptor 207    
07/11/2018 13:45:52    Preload library access control    Unknown opened directory on descriptor 240    
07/11/2018 13:39:33    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 13:39:02    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 13:36:16    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 13:35:53    Media control access    Cannot unblock removable media (org.freedesktop.udisks2.filesystem-mount)    
07/11/2018 13:34:45    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 13:17:58    ESET Daemon    Error updating Antivirus modules: Download interrupted.    
07/11/2018 13:11:39    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 13:11:08    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 13:10:23    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
07/11/2018 13:09:58    Media control access    Cannot unblock removable media (org.freedesktop.udisks2.filesystem-mount)    
07/11/2018 13:08:23    Media control access    Cannot unblock removable media (org.freedesktop.udisks2.filesystem-mount)    
 

Desde já agradeço pela atenção de sempre e aguardo com brevidade por um retorno.

Editado: Segue em anexo, imagem dos dados da configuração da maquina e versão do Linux Ubuntu 18.10 Cosmic.

Thank you in advance for your attention and look forward to a return.

Edited: Attached is the image of the configuration data of the machine and version of Linux Ubuntu 18.10 Cosmic.

 

Serial.com 

Captura de tela de 2018-11-07 15-25-33.png

Edited by Serial.com
Posted

Can this help you find a solution to the problem?

Isso pode ajudar a encontrar solução para o problema?

edson@edson-p6540br:~$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x11, date = 2018-05-08
[    0.000000] Linux version 4.18.0-10-generic (buildd@lgw01-amd64-060) (gcc version 8.2.0 (Ubuntu 8.2.0-7ubuntu1)) #11-Ubuntu SMP Thu Oct 11 15:13:55 UTC 2018 (Ubuntu 4.18.0-10.11-generic 4.18.12)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-10-generic root=UUID=d7c947c4-6629-43fa-8fd0-ad4a91ae8a03 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000c377ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c3780000-0x00000000c378dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c378e000-0x00000000c37cffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c37d0000-0x00000000c37dffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c37ed000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000200000000-0x000000022fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: Hewlett-Packard p6540br/2A9C, BIOS 6.07 05/19/2010
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-DFFFF uncachable
[    0.000000]   E0000-E3FFF write-protect
[    0.000000]   E4000-E7FFF write-through
[    0.000000]   E8000-EBFFF write-protect
[    0.000000]   EC000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask E00000000 write-back
[    0.000000]   1 base 200000000 mask FC0000000 write-back
[    0.000000]   2 base 240000000 mask FE0000000 write-back
[    0.000000]   3 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   5 base 1FC000000 mask FFC000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 8896M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K     chunk_size: 128M     num_reg: 7      lose cover RAM: 0G
[    0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: update [mem 0x1fc000000-0x1ffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xc3780 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [(____ptrval____)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [(____ptrval____)] 98000 size 24576
[    0.000000] BRK [0x1cf5c000, 0x1cf5cfff] PGTABLE
[    0.000000] BRK [0x1cf5d000, 0x1cf5dfff] PGTABLE
[    0.000000] BRK [0x1cf5e000, 0x1cf5efff] PGTABLE
[    0.000000] BRK [0x1cf5f000, 0x1cf5ffff] PGTABLE
[    0.000000] BRK [0x1cf60000, 0x1cf60fff] PGTABLE
[    0.000000] BRK [0x1cf61000, 0x1cf61fff] PGTABLE
[    0.000000] BRK [0x1cf62000, 0x1cf62fff] PGTABLE
[    0.000000] BRK [0x1cf63000, 0x1cf63fff] PGTABLE
[    0.000000] BRK [0x1cf64000, 0x1cf64fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x30b11000-0x3457ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F9F10 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000C3780100 00006C (v01 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
[    0.000000] ACPI: FACP 0x00000000C3780290 0000F4 (v04 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20180531/tbfadt-569)
[    0.000000] ACPI: DSDT 0x00000000C37805E0 005AB5 (v02 HPQOEM SLIC-CPC 00000007 INTL 20051117)
[    0.000000] ACPI: FACS 0x00000000C378E000 000040
[    0.000000] ACPI: FACS 0x00000000C378E000 000040
[    0.000000] ACPI: APIC 0x00000000C3780390 00008C (v02 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
[    0.000000] ACPI: MCFG 0x00000000C3780420 00003C (v01 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
[    0.000000] ACPI: SLIC 0x00000000C3780460 000176 (v01 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
[    0.000000] ACPI: OEMB 0x00000000C378E040 000072 (v01 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000C378A680 000843 (v01 HPQOEM SLIC-CPC 00000001 INTL 20051117)
[    0.000000] ACPI: HPET 0x00000000C378AED0 000038 (v01 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
[    0.000000] ACPI: GSCI 0x00000000C378E0C0 002024 (v01 HPQOEM SLIC-CPC 20100519 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x00000000C3791930 000363 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000022fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x22ffd1000-0x22fffbfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000022fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000c377ffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000001fbffffff]
[    0.000000]   node   0: [mem 0x0000000200000000-0x000000022fffffff]
[    0.000000] Reserved but unavailable: 35043 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000022fffffff]
[    0.000000] On node 0 totalpages: 2029341
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12446 pages used for memmap
[    0.000000]   DMA32 zone: 796544 pages, LIFO batch:31
[    0.000000]   Normal zone: 19456 pages used for memmap
[    0.000000]   Normal zone: 1228800 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0xc8000000-0xcfffffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc3780000-0xc378dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc378e000-0xc37cffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc37d0000-0xc37dffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc37e0000-0xc37ecfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc37ed000-0xcfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
[    0.000000] [mem 0xd0000000-0xfedfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1997354
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-10-generic root=UUID=d7c947c4-6629-43fa-8fd0-ad4a91ae8a03 ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7832688K/8117364K available (12300K kernel code, 2633K rwdata, 4348K rodata, 2440K init, 2336K bss, 284676K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 40807 entries in 160 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.000000]     Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3059.402 MHz processor
[    0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2c197843cc1, max_idle_ns: 440795270473 ns
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6118.80 BogoMIPS (lpj=12237608)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.028068] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.028127] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028160] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.028440] mce: CPU supports 9 MCE banks
[    0.028447] CPU0: Thermal monitoring enabled (TM1)
[    0.028456] process: using mwait in idle threads
[    0.028460] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[    0.028461] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.028463] Spectre V2 : Mitigation: Full generic retpoline
[    0.028463] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.028464] Spectre V2 : Spectre v2 mitigation: Enabling Indirect Branch Prediction Barrier
[    0.028464] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.028466] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.028571] Freeing SMP alternatives memory: 36K
[    0.036000] smpboot: CPU0: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz (family: 0x6, model: 0x25, stepping: 0x2)
[    0.036000] Performance Events: PEBS fmt1+, Westmere events, 16-deep LBR, Intel PMU driver.
[    0.036000] core: CPUID marked event: 'bus cycles' unavailable
[    0.036000] ... version:                3
[    0.036000] ... bit width:              48
[    0.036000] ... generic registers:      4
[    0.036000] ... value mask:             0000ffffffffffff
[    0.036000] ... max period:             000000007fffffff
[    0.036000] ... fixed-purpose events:   3
[    0.036000] ... event mask:             000000070000000f
[    0.036000] Hierarchical SRCU implementation.
[    0.036000] smp: Bringing up secondary CPUs ...
[    0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.036000] x86: Booting SMP configuration:
[    0.036000] .... node  #0, CPUs:      #1 #2 #3
[    0.040081] smp: Brought up 1 node, 4 CPUs
[    0.040081] smpboot: Max logical packages: 2
[    0.040081] smpboot: Total of 4 processors activated (24475.21 BogoMIPS)
[    0.044423] devtmpfs: initialized
[    0.044423] x86/mm: Memory block size: 128MB
[    0.044705] PM: Registering ACPI NVS region [mem 0xc378e000-0xc37cffff] (270336 bytes)
[    0.044705] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.044705] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.044705] pinctrl core: initialized pinctrl subsystem
[    0.044705] RTC time:  1:13:44, date: 11/09/18
[    0.044705] NET: Registered protocol family 16
[    0.044705] audit: initializing netlink subsys (disabled)
[    0.044705] audit: type=2000 audit(1541726024.044:1): state=initialized audit_enabled=0 res=1
[    0.044705] cpuidle: using governor ladder
[    0.044705] cpuidle: using governor menu
[    0.044705] ACPI: bus type PCI registered
[    0.044705] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.044705] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.044705] PCI: not using MMCONFIG
[    0.044705] PCI: Using configuration type 1 for base access
[    0.045151] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.048006] ACPI: Added _OSI(Module Device)
[    0.048006] ACPI: Added _OSI(Processor Device)
[    0.048006] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.048006] ACPI: Added _OSI(Processor Aggregator Device)
[    0.048006] ACPI: Added _OSI(Linux-Dell-Video)
[    0.048006] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.052002] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.052002] ACPI: Dynamic OEM Table Load:
[    0.052002] ACPI: SSDT 0xFFFF9B02A605C000 001340 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
[    0.056011] ACPI: Dynamic OEM Table Load:
[    0.056011] ACPI: SSDT 0xFFFF9B02A6056800 0004F4 (v01 HPQOEM SLIC-CPC 00003001 INTL 20051117)
[    0.056011] ACPI: Interpreter enabled
[    0.056011] ACPI: (supports S0 S1 S3 S4 S5)
[    0.056011] ACPI: Using IOAPIC for interrupt routing
[    0.056011] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.056011] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.056011] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.056011] ACPI: Enabled 14 GPEs in block 00 to 3F
[    0.065126] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.065132] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.065136] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.065482] PCI host bridge to bus 0000:00
[    0.065484] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.065486] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.065487] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.065488] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[    0.065490] pci_bus 0000:00: root bus resource [mem 0xc4000000-0xdfffffff window]
[    0.065491] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[    0.065492] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.065500] pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
[    0.065521] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[    0.065606] pci 0000:00:02.0: [8086:0042] type 00 class 0x030000
[    0.065615] pci 0000:00:02.0: reg 0x10: [mem 0xfb800000-0xfbbfffff 64bit]
[    0.065620] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.065624] pci 0000:00:02.0: reg 0x20: [io  0xdc00-0xdc07]
[    0.065740] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.065768] pci 0000:00:16.0: reg 0x10: [mem 0xfbefbc00-0xfbefbc0f 64bit]
[    0.065856] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.065952] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.065970] pci 0000:00:1a.0: reg 0x10: [mem 0xfbef8000-0xfbef83ff]
[    0.066041] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.066133] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.066150] pci 0000:00:1b.0: reg 0x10: [mem 0xfbef4000-0xfbef7fff 64bit]
[    0.066211] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.066297] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.066358] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.066459] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.066478] pci 0000:00:1d.0: reg 0x10: [mem 0xfbef2000-0xfbef23ff]
[    0.066549] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.066639] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.066761] pci 0000:00:1f.0: [8086:3b08] type 00 class 0x060100
[    0.066937] pci 0000:00:1f.2: [8086:3b22] type 00 class 0x010601
[    0.066952] pci 0000:00:1f.2: reg 0x10: [io  0xd880-0xd887]
[    0.066958] pci 0000:00:1f.2: reg 0x14: [io  0xd800-0xd803]
[    0.066964] pci 0000:00:1f.2: reg 0x18: [io  0xd480-0xd487]
[    0.066970] pci 0000:00:1f.2: reg 0x1c: [io  0xd400-0xd403]
[    0.066976] pci 0000:00:1f.2: reg 0x20: [io  0xd080-0xd09f]
[    0.066983] pci 0000:00:1f.2: reg 0x24: [mem 0xfbef0000-0xfbef07ff]
[    0.067016] pci 0000:00:1f.2: PME# supported from D3hot
[    0.067105] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.067120] pci 0000:00:1f.3: reg 0x10: [mem 0xfbefb800-0xfbefb8ff 64bit]
[    0.067137] pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
[    0.067282] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[    0.067308] pci 0000:01:00.0: reg 0x10: [io  0xe800-0xe8ff]
[    0.067332] pci 0000:01:00.0: reg 0x18: [mem 0xfbfff000-0xfbffffff 64bit]
[    0.067348] pci 0000:01:00.0: reg 0x20: [mem 0xfaffc000-0xfaffffff 64bit pref]
[    0.067358] pci 0000:01:00.0: reg 0x30: [mem 0xfbfc0000-0xfbfdffff pref]
[    0.067432] pci 0000:01:00.0: supports D1 D2
[    0.067433] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.080029] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.080035] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.080041] pci 0000:00:1c.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.080048] pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.080073] pci_bus 0000:02: extended config space not accessible
[    0.080137] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[    0.080144] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.080145] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.080146] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.080147] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[    0.080149] pci 0000:00:1e.0:   bridge window [mem 0xc4000000-0xdfffffff window] (subtractive decode)
[    0.080150] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[    0.080604] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[    0.080674] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[    0.080740] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 6 7 10 11 12 14 15)
[    0.080808] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15)
[    0.080876] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.080944] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[    0.081013] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 *11 12 14 15)
[    0.081081] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
[    0.084003] SCSI subsystem initialized
[    0.084024] libata version 3.00 loaded.
[    0.084027] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.084027] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.084027] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.084027] vgaarb: loaded
[    0.084028] ACPI: bus type USB registered
[    0.084041] usbcore: registered new interface driver usbfs
[    0.084048] usbcore: registered new interface driver hub
[    0.084066] usbcore: registered new device driver usb
[    0.084084] pps_core: LinuxPPS API ver. 1 registered
[    0.084085] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.084087] PTP clock support registered
[    0.084101] EDAC MC: Ver: 3.0.0
[    0.084101] PCI: Using ACPI for IRQ routing
[    0.088458] PCI: Discovered peer bus ff
[    0.088459] PCI: root bus ff: using default resources
[    0.088460] PCI: Probing PCI hardware (bus ff)
[    0.088482] PCI host bridge to bus 0000:ff
[    0.088484] pci_bus 0000:ff: root bus resource [io  0x0000-0xffff]
[    0.088485] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]
[    0.088486] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[    0.088489] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.088493] pci 0000:ff:00.0: [8086:2c61] type 00 class 0x060000
[    0.088531] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.088567] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.088600] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.088633] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.088667] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.088707] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff
[    0.088709] pci_bus 0000:ff: busn_res: can not insert [bus ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-ff])
[    0.088712] PCI: pci_cache_line_size set to 64 bytes
[    0.088741] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.088742] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.088743] e820: reserve RAM buffer [mem 0xc3780000-0xc3ffffff]
[    0.088848] NetLabel: Initializing
[    0.088848] NetLabel:  domain hash size = 128
[    0.088849] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.088866] NetLabel:  unlabeled traffic allowed by default
[    0.088880] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.088880] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.092016] clocksource: Switched to clocksource tsc-early
[    0.104464] VFS: Disk quotas dquot_6.6.0
[    0.104483] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.104607] AppArmor: AppArmor Filesystem Enabled
[    0.104641] pnp: PnP ACPI init
[    0.104748] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
[    0.104750] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
[    0.104752] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved
[    0.104753] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[    0.104760] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.104846] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.105007] system 00:02: [io  0x0a00-0x0a0f] has been reserved
[    0.105012] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.105195] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.105197] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.105199] system 00:03: [io  0x0500-0x057f] has been reserved
[    0.105201] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.105202] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.105204] system 00:03: [mem 0xfed40000-0xfed8ffff] has been reserved
[    0.105208] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.105379] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.105381] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.105385] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.105453] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.105457] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.105702] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.105704] system 00:06: [mem 0x000c0000-0x000cffff] could not be reserved
[    0.105706] system 00:06: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.105707] system 00:06: [mem 0x00100000-0xc3ffffff] could not be reserved
[    0.105709] system 00:06: [mem 0xfed90000-0xffffffff] could not be reserved
[    0.105713] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.105874] pnp: PnP ACPI: found 7 devices
[    0.111587] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.111608] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.111611] pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
[    0.111615] pci 0000:00:1c.0:   bridge window [mem 0xfbf00000-0xfbffffff]
[    0.111618] pci 0000:00:1c.0:   bridge window [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.111622] pci 0000:00:1e.0: PCI bridge to [bus 02]
[    0.111631] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.111633] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.111634] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.111635] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.111637] pci_bus 0000:00: resource 8 [mem 0xc4000000-0xdfffffff window]
[    0.111638] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.111639] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.111641] pci_bus 0000:01: resource 1 [mem 0xfbf00000-0xfbffffff]
[    0.111642] pci_bus 0000:01: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref]
[    0.111643] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.111645] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.111646] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.111647] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff window]
[    0.111649] pci_bus 0000:02: resource 8 [mem 0xc4000000-0xdfffffff window]
[    0.111650] pci_bus 0000:02: resource 9 [mem 0xf0000000-0xfed8ffff window]
[    0.111711] pci_bus 0000:ff: resource 4 [io  0x0000-0xffff]
[    0.111712] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]
[    0.111745] NET: Registered protocol family 2
[    0.111996] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.112038] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.112232] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.112493] TCP: Hash tables configured (established 65536 bind 65536)
[    0.112546] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.112607] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.112692] NET: Registered protocol family 1
[    0.112696] NET: Registered protocol family 44
[    0.112707] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.113113] PCI: CLS 32 bytes, default 64
[    0.113153] Unpacking initramfs...
[    0.920297] Freeing initrd memory: 59836K
[    0.920335] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.920338] software IO TLB [mem 0xbf780000-0xc3780000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    0.920560] Scanning for low memory corruption every 60 seconds
[    0.921233] Initialise system trusted keyrings
[    0.921243] Key type blacklist registered
[    0.921275] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.922452] zbud: loaded
[    0.922909] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.923076] fuse init (API version 7.27)
[    0.923129] pstore: using deflate compression
[    0.924210] Key type asymmetric registered
[    0.924212] Asymmetric key parser 'x509' registered
[    0.924241] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.924277] io scheduler noop registered
[    0.924278] io scheduler deadline registered
[    0.924305] io scheduler cfq registered (default)
[    0.924626] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.924675] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.924676] vesafb: scrolling: redraw
[    0.924678] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.924690] vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k
[    0.924777] Console: switching to colour frame buffer device 128x48
[    0.924799] fb0: VESA VGA frame buffer device
[    0.924813] intel_idle: MWAIT substates: 0x1120
[    0.924814] intel_idle: v0.4.1 model 0x25
[    0.924934] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.925032] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.925042] ACPI: Power Button [PWRB]
[    0.925076] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.925088] ACPI: Power Button [PWRF]
[    0.925436] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.927016] Linux agpgart interface v0.103
[    0.928707] loop: module loaded
[    0.928870] libphy: Fixed MDIO Bus: probed
[    0.928871] tun: Universal TUN/TAP device driver, 1.6
[    0.928897] PPP generic driver version 2.4.2
[    0.928927] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.928930] ehci-pci: EHCI PCI platform driver
[    0.929064] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.929070] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.929082] ehci-pci 0000:00:1a.0: debug port 2
[    0.932995] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
[    0.933008] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfbef8000
[    0.946746] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.946846] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.946847] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.946849] usb usb1: Product: EHCI Host Controller
[    0.946850] usb usb1: Manufacturer: Linux 4.18.0-10-generic ehci_hcd
[    0.946851] usb usb1: SerialNumber: 0000:00:1a.0
[    0.947137] hub 1-0:1.0: USB hub found
[    0.947152] hub 1-0:1.0: 2 ports detected
[    0.947389] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.947395] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.947404] ehci-pci 0000:00:1d.0: debug port 2
[    0.951303] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
[    0.951312] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfbef2000
[    0.966620] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.966685] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.966689] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.966691] usb usb2: Product: EHCI Host Controller
[    0.966694] usb usb2: Manufacturer: Linux 4.18.0-10-generic ehci_hcd
[    0.966696] usb usb2: SerialNumber: 0000:00:1d.0
[    0.966966] hub 2-0:1.0: USB hub found
[    0.966980] hub 2-0:1.0: 2 ports detected
[    0.967119] ehci-platform: EHCI generic platform driver
[    0.967126] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.967129] ohci-pci: OHCI PCI platform driver
[    0.967138] ohci-platform: OHCI generic platform driver
[    0.967143] uhci_hcd: USB Universal Host Controller Interface driver
[    0.967181] i8042: PNP: No PS/2 controller found.
[    0.967473] mousedev: PS/2 mouse device common for all mice
[    0.967943] rtc_cmos 00:01: RTC can wake from S4
[    0.968121] rtc_cmos 00:01: registered as rtc0
[    0.968136] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.968142] i2c /dev entries driver
[    0.968146] pcie_mp2_amd: AMD(R) PCI-E MP2 Communication Driver Version: 1.0
[    0.968198] device-mapper: uevent: version 1.0.3
[    0.968282] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    0.968346] ledtrig-cpu: registered to indicate activity on CPUs
[    0.968673] NET: Registered protocol family 10
[    0.974025] Segment Routing with IPv6
[    0.974063] NET: Registered protocol family 17
[    0.974139] Key type dns_resolver registered
[    0.974492] RAS: Correctable Errors collector initialized.
[    0.974527] microcode: sig=0x20652, pf=0x2, revision=0x11
[    0.974669] microcode: Microcode Update Driver: v2.2.
[    0.974679] sched_clock: Marking stable (974664559, 0)->(1066982487, -92317928)
[    0.974913] registered taskstats version 1
[    0.974923] Loading compiled-in X.509 certificates
[    0.977438] Loaded X.509 cert 'Build time autogenerated kernel key: c2af9a36da7641558368c66bd9a6950ecebd7ec0'
[    0.977459] zswap: loaded using pool lzo/zbud
[    0.981299] Key type big_key registered
[    0.981303] Key type trusted registered
[    0.983104] Key type encrypted registered
[    0.983108] AppArmor: AppArmor sha1 policy hashing enabled
[    0.983116] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.983120] ima: Allocated hash algorithm: sha1
[    0.983135] evm: Initialising EVM extended attributes:
[    0.983136] evm: security.selinux
[    0.983137] evm: security.SMACK64
[    0.983137] evm: security.SMACK64EXEC
[    0.983137] evm: security.SMACK64TRANSMUTE
[    0.983138] evm: security.SMACK64MMAP
[    0.983138] evm: security.apparmor
[    0.983139] evm: security.ima
[    0.983139] evm: security.capability
[    0.983140] evm: HMAC attrs: 0x1
[    0.983468]   Magic number: 10:975:204
[    0.983531] acpi device:2c: hash matches
[    0.983610] rtc_cmos 00:01: setting system clock to 2018-11-09 01:13:45 UTC (1541726025)
[    0.987200] Freeing unused kernel image memory: 2440K
[    0.998670] Write protecting the kernel read-only data: 20480k
[    0.999476] Freeing unused kernel image memory: 2008K
[    0.999900] Freeing unused kernel image memory: 1796K
[    1.010658] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.010659] x86/mm: Checking user space page tables
[    1.021089] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.113987] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    1.118191] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.118201] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.118639] r8169 0000:01:00.0 eth0: RTL8168d/8111d, d4:85:64:ce:9c:0d, XID 281000c0, IRQ 24
[    1.118641] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.118816] ahci 0000:00:1f.2: version 3.0
[    1.119011] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.129120] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[    1.129125] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    1.144385] r8169 0000:01:00.0 enp1s0: renamed from eth0
[    1.156894] gpio_ich: GPIO from 436 to 511 on gpio_ich
[    1.190630] pci 0000:00:00.0: Intel HD Graphics Chipset
[    1.190652] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.191347] pci 0000:00:00.0: detected 131072K stolen memory
[    1.191406] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[    1.191407] fb: switching to inteldrmfb from VESA VGA
[    1.191434] Console: switching to colour dummy device 80x25
[    1.191575] [drm] Replacing VGA console driver
[    1.192319] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.192320] [drm] Driver supports precise vblank timestamp query.
[    1.192839] scsi host0: ahci
[    1.192942] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.192994] scsi host1: ahci
[    1.193081] scsi host2: ahci
[    1.193332] scsi host3: ahci
[    1.193430] scsi host4: ahci
[    1.193529] scsi host5: ahci
[    1.193580] ata1: SATA max UDMA/133 abar m2048@0xfbef0000 port 0xfbef0100 irq 25
[    1.193582] ata2: SATA max UDMA/133 abar m2048@0xfbef0000 port 0xfbef0180 irq 25
[    1.193584] ata3: SATA max UDMA/133 abar m2048@0xfbef0000 port 0xfbef0200 irq 25
[    1.193585] ata4: SATA max UDMA/133 abar m2048@0xfbef0000 port 0xfbef0280 irq 25
[    1.193587] ata5: SATA max UDMA/133 abar m2048@0xfbef0000 port 0xfbef0300 irq 25
[    1.193589] ata6: SATA max UDMA/133 abar m2048@0xfbef0000 port 0xfbef0380 irq 25
[    1.199659] [drm] RC6 disabled, disabling runtime PM support
[    1.200341] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    1.226858] fbcon: inteldrmfb (fb0) is primary device
[    1.226941] Console: switching to colour frame buffer device 128x48
[    1.226964] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.280081] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.300078] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.436447] usb 1-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[    1.436451] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.436658] hub 1-1:1.0: USB hub found
[    1.437083] hub 1-1:1.0: 6 ports detected
[    1.456703] usb 2-1: New USB device found, idVendor=8087, idProduct=0020, bcdDevice= 0.00
[    1.456707] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.457135] hub 2-1:1.0: USB hub found
[    1.457258] hub 2-1:1.0: 8 ports detected
[    1.511452] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.512170] ata1.00: ATA-8: WDC WD10EADS-65P6B0, 01.00A01, max UDMA/133
[    1.512173] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    1.513004] ata1.00: configured for UDMA/133
[    1.513284] scsi 0:0:0:0: Direct-Access     ATA      WDC WD10EADS-65P 0A01 PQ: 0 ANSI: 5
[    1.513699] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.513702] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.513711] sd 0:0:0:0: [sda] Write Protect is off
[    1.513713] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.513732] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.577035]  sda: sda1 sda2 sda3
[    1.577459] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.724078] usb 1-1.3: new low-speed USB device number 3 using ehci-pci
[    1.744099] usb 2-1.5: new high-speed USB device number 3 using ehci-pci
[    1.827393] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.828306] ata2.00: ATA-8: ST1000DM003-1CH162, CC43, max UDMA/133
[    1.828309] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    1.829255] ata2.00: configured for UDMA/133
[    1.829646] scsi 1:0:0:0: Direct-Access     ATA      ST1000DM003-1CH1 CC43 PQ: 0 ANSI: 5
[    1.830170] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    1.830198] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.830200] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[    1.830224] sd 1:0:0:0: [sdb] Write Protect is off
[    1.830226] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.830244] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.839166] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=0841, bcdDevice= 1.00
[    1.839171] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.839174] usb 1-1.3: Product: HP USB Multimedia Keyboard
[    1.839177] usb 1-1.3: Manufacturer: CHICONY
[    1.843808] hidraw: raw HID events driver (C) Jiri Kosina
[    1.851511] usbcore: registered new interface driver usbhid
[    1.851511] usbhid: USB HID core driver
[    1.853754] input: CHICONY HP USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:04F2:0841.0001/input/input2
[    1.864426] usb 2-1.5: New USB device found, idVendor=1871, idProduct=0142, bcdDevice= 0.0c
[    1.864430] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.864433] usb 2-1.5: Product: USB2.0 Camera
[    1.864437] usb 2-1.5: Manufacturer: AVEO Technology Corp.
[    1.871838]  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
[    1.872960] sd 1:0:0:0: [sdb] Attached SCSI disk
[    1.912394] hid-generic 0003:04F2:0841.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:1a.0-1.3/input0
[    1.912607] input: CHICONY HP USB Multimedia Keyboard System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:04F2:0841.0002/input/input3
[    1.924079] usb 1-1.4: new low-speed USB device number 4 using ehci-pci
[    1.944073] usb 2-1.7: new high-speed USB device number 4 using ehci-pci
[    1.948041] tsc: Refined TSC clocksource calibration: 3059.176 MHz
[    1.948052] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2c18a318d9d, max_idle_ns: 440795359963 ns
[    1.948120] clocksource: Switched to clocksource tsc
[    1.972258] input: CHICONY HP USB Multimedia Keyboard Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.1/0003:04F2:0841.0002/input/input4
[    1.972393] hid-generic 0003:04F2:0841.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY HP USB Multimedia Keyboard] on usb-0000:00:1a.0-1.3/input1
[    2.036218] usb 1-1.4: New USB device found, idVendor=192f, idProduct=0416, bcdDevice= 2.00
[    2.036222] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.036225] usb 1-1.4: Product: USB Optical Mouse
[    2.039159] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:192F:0416.0003/input/input6
[    2.039318] hid-generic 0003:192F:0416.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-1.4/input0
[    2.072620] usb 2-1.7: New USB device found, idVendor=0bda, idProduct=0151, bcdDevice=51.95
[    2.072623] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.072626] usb 2-1.7: Product: USB2.0-CRW
[    2.072628] usb 2-1.7: Manufacturer: Generic
[    2.072631] usb 2-1.7: SerialNumber: 20060413092100000
[    2.077765] usb-storage 2-1.7:1.0: USB Mass Storage device detected
[    2.077887] scsi host6: usb-storage 2-1.7:1.0
[    2.077953] usbcore: registered new interface driver usb-storage
[    2.079192] usbcore: registered new interface driver uas
[    2.143279] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.145449] ata3.00: ATAPI: hp        DDVDW TS-H653R, 0E00, max UDMA/100
[    2.147921] ata3.00: configured for UDMA/100
[    2.149168] scsi 2:0:0:0: CD-ROM            hp       CDDVDW TS-H653R  0E00 PQ: 0 ANSI: 5
[    2.176407] random: fast init done
[    2.176601] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.176628] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.176635] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.207677] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.207679] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.207880] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    2.207957] sr 2:0:0:0: Attached scsi generic sg2 type 5
[    2.523653] ata4: SATA link down (SStatus 0 SControl 300)
[    2.839594] ata5: SATA link down (SStatus 0 SControl 300)
[    3.105744] scsi 6:0:0:0: Direct-Access     Generic- Compact Flash    1.00 PQ: 0 ANSI: 0 CCS
[    3.111116] scsi 6:0:0:1: Direct-Access     Generic- SM/xD-Picture    1.00 PQ: 0 ANSI: 0 CCS
[    3.116364] scsi 6:0:0:2: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0 CCS
[    3.121630] scsi 6:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.00 PQ: 0 ANSI: 0 CCS
[    3.122125] sd 6:0:0:0: Attached scsi generic sg3 type 0
[    3.122315] sd 6:0:0:1: Attached scsi generic sg4 type 0
[    3.122496] sd 6:0:0:2: Attached scsi generic sg5 type 0
[    3.122663] sd 6:0:0:3: Attached scsi generic sg6 type 0
[    3.155151] ata6: SATA link down (SStatus 0 SControl 300)
[    3.164148] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    3.164985] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[    3.165886] sd 6:0:0:2: [sde] Attached SCSI removable disk
[    3.166727] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[    5.053617] random: crng init done
[    5.053622] random: 7 urandom warning(s) missed due to ratelimiting
[    7.282380] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    9.042787] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    9.060320] systemd[1]: Detected architecture x86-64.
[    9.079563] systemd[1]: Set hostname to <edson-p6540br>.
[   12.027341] systemd[1]: Configuration file /lib/systemd/system/esets.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[   12.094976] systemd[1]: Reached target Remote File Systems.
[   12.096107] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   12.096194] systemd[1]: Listening on udev Kernel Socket.
[   12.096209] systemd[1]: Reached target User and Group Name Lookups.
[   12.096269] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   12.096356] systemd[1]: Listening on udev Control Socket.
[   12.324118] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   12.548281] bpfilter: Loaded bpfilter_umh pid 376
[   12.701556] systemd-journald[360]: Received request to flush runtime journal from PID 1
[   13.115127] lp: driver loaded but no devices found
[   13.274258] ppdev: user-space parallel port driver
[   13.391336] systemd-journald[360]: File /var/log/journal/6d395b4374374027b159b211e3f7d18a/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   17.369893] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[   17.506754] media: Linux media interface: v0.10
[   17.573519] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC888: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   17.573522] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   17.573523] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   17.573524] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   17.573525] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[   17.573526] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   17.573528] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   17.573530] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   17.573531] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   17.587160] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   17.587234] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   17.587301] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   17.587370] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   17.587438] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   17.587504] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   17.587573] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   17.587642] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   17.619614] videodev: Linux video capture interface: v2.00
[   17.878275] usb 2-1.5: 3:1: cannot get freq at ep 0x84
[   17.880357] usb 2-1.5: Warning! Unlikely big volume range (=8191), cval->res is probably wrong.
[   17.880360] usb 2-1.5: [3] FU [Mic Capture Volume] ch = 1, val = 0/8191/1
[   17.880574] usbcore: registered new interface driver snd-usb-audio
[   17.881523] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0142)
[   17.883837] uvcvideo 2-1.5:1.0: Entity type for entity Extension 4 was not initialized!
[   17.883840] uvcvideo 2-1.5:1.0: Entity type for entity Processing 3 was not initialized!
[   17.883842] uvcvideo 2-1.5:1.0: Entity type for entity Camera 1 was not initialized!
[   17.883937] input: USB2.0 Camera: USB2.0 Camera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input15
[   17.884709] usbcore: registered new interface driver uvcvideo
[   17.884710] USB Video Class driver (1.1.1)
[   18.657551] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[   21.560346] Adding 8032252k swap on /dev/mapper/fedora-swap.  Priority:-2 extents:1 across:8032252k FS
[   21.716179] Adding 44920828k swap on /dev/sda3.  Priority:-3 extents:1 across:44920828k FS
[   31.347288] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[   32.838134] audit: type=1400 audit(1541726057.348:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1054 comm="apparmor_parser"
[   32.838138] audit: type=1400 audit(1541726057.348:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1054 comm="apparmor_parser"
[   32.838141] audit: type=1400 audit(1541726057.348:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1054 comm="apparmor_parser"
[   32.838143] audit: type=1400 audit(1541726057.348:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1054 comm="apparmor_parser"
[   32.843373] audit: type=1400 audit(1541726057.352:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1057 comm="apparmor_parser"
[   32.843378] audit: type=1400 audit(1541726057.352:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1057 comm="apparmor_parser"
[   32.843381] audit: type=1400 audit(1541726057.352:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1057 comm="apparmor_parser"
[   32.866037] audit: type=1400 audit(1541726057.376:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=1055 comm="apparmor_parser"
[   32.866044] audit: type=1400 audit(1541726057.376:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=1055 comm="apparmor_parser"
[   32.866047] audit: type=1400 audit(1541726057.376:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=1055 comm="apparmor_parser"
[   39.993639] kauditd_printk_skb: 28 callbacks suppressed
[   39.993641] audit: type=1400 audit(1541726064.504:40): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/opt/eset/esets/lib/libesets_pac.so" pid=1650 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   39.993977] audit: type=1400 audit(1541726064.504:41): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/opt/eset/esets/lib/libesets_pac.so" pid=1650 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   43.408033] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   43.900070] r8169 0000:01:00.0 enp1s0: link down
[   43.900072] r8169 0000:01:00.0 enp1s0: link down
[   43.900168] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[   45.382115] r8169 0000:01:00.0 enp1s0: link up
[   45.382130] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[   45.447168] audit: type=1400 audit(1541726069.956:42): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/opt/eset/esets/info/pkgid" pid=1947 comm="cups-exec" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   45.447345] audit: type=1400 audit(1541726069.956:43): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/opt/eset/esets/info/pkgid" pid=1968 comm="cups-exec" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   45.447512] audit: type=1400 audit(1541726069.956:44): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/opt/eset/esets/info/pkgid" pid=1969 comm="cups-exec" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   45.448244] audit: type=1400 audit(1541726069.960:45): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/opt/eset/esets/info/pkgid" pid=1970 comm="cups-exec" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   46.022876] audit: type=1400 audit(1541726070.532:46): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/opt/eset/esets/info/pkgid" pid=1947 comm="dbus" requested_mask="r" denied_mask="r" fsuid=7 ouid=0
[   46.023078] audit: type=1400 audit(1541726070.532:47): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/opt/eset/esets/info/pkgid" pid=1970 comm="dbus" requested_mask="r" denied_mask="r" fsuid=7 ouid=0
[   46.023419] audit: type=1400 audit(1541726070.532:48): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/opt/eset/esets/info/pkgid" pid=1968 comm="dbus" requested_mask="r" denied_mask="r" fsuid=7 ouid=0
[   46.024781] audit: type=1400 audit(1541726070.536:49): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/opt/eset/esets/info/pkgid" pid=1969 comm="dbus" requested_mask="r" denied_mask="r" fsuid=7 ouid=0
[   46.056323] audit: type=1400 audit(1541726070.568:50): apparmor="DENIED" operation="open" profile="/sbin/dhclient" name="/opt/eset/esets/lib/libesets_pac.so" pid=1992 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   46.056371] audit: type=1400 audit(1541726070.568:51): apparmor="DENIED" operation="open" profile="/sbin/dhclient" name="/opt/eset/esets/lib/libesets_pac.so" pid=1992 comm="dhclient" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   48.223819] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:1405:a515:e19d:f1e5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=549275 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   48.223848] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:1405:a515:e19d:f1e5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=783886 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[   48.234002] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:1405:a515:e19d:f1e5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=549275 PROTO=UDP SPT=8612 DPT=8612 LEN=24 
[   48.234035] [UFW BLOCK] IN=enp1s0 OUT= MAC= SRC=fe80:0000:0000:0000:1405:a515:e19d:f1e5 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=783886 PROTO=UDP SPT=8612 DPT=8610 LEN=24 
[   59.109660] usb 2-1.5: 3:1: cannot get freq at ep 0x84
[   59.422410] usb 2-1.5: 3:1: cannot get freq at ep 0x84
[   69.450379] kauditd_printk_skb: 1 callbacks suppressed
[   69.450383] audit: type=1400 audit(1541726093.960:53): apparmor="DENIED" operation="open" profile="/usr/lib/NetworkManager/nm-dhcp-helper" name="/opt/eset/esets/lib/libesets_pac.so" pid=2521 comm="nm-dhcp-helper" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[   76.309095] audit: type=1400 audit(1541726100.824:54): apparmor="DENIED" operation="connect" profile="/usr/sbin/cupsd" pid=1330 comm="cupsd" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@2F746D702F65736574732E736F636B0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" peer="unconfined"
[   83.390143] systemd-journald[360]: File /var/log/journal/6d395b4374374027b159b211e3f7d18a/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   96.117367] audit: type=1400 audit(1541726120.565:55): apparmor="DENIED" operation="connect" profile="/usr/sbin/cupsd" pid=1330 comm="cupsd" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@2F746D702F65736574732E736F636B0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" peer="unconfined"
[   96.168695] rfkill: input handler disabled
[  127.350278] audit: type=1400 audit(1541726151.650:56): apparmor="DENIED" operation="connect" profile="/usr/sbin/cupsd" pid=1330 comm="cupsd" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@2F746D702F65736574732E736F636B0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" peer="unconfined"
[  588.383830] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
[  647.513173] perf: interrupt took too long (3132 > 3126), lowering kernel.perf_event_max_sample_rate to 63750
[  709.219438] perf: interrupt took too long (3936 > 3915), lowering kernel.perf_event_max_sample_rate to 50750
[ 1163.725608] perf: interrupt took too long (5031 > 4920), lowering kernel.perf_event_max_sample_rate to 39750
[ 2801.367520] audit: type=1400 audit(1541728825.639:57): apparmor="DENIED" operation="connect" profile="/usr/sbin/cupsd" pid=1330 comm="cupsd" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@2F746D702F65736574732E736F636B0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" peer="unconfined"
[ 2801.501691] audit: type=1400 audit(1541728825.775:58): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/opt/eset/esets/info/pkgid" pid=7031 comm="cupsd" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 2801.502178] audit: type=1400 audit(1541728825.775:59): apparmor="DENIED" operation="connect" profile="/usr/sbin/cupsd" pid=7031 comm="cupsd" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@2F746D702F65736574732E736F636B0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" peer="unconfined"
[ 2801.502372] audit: type=1400 audit(1541728825.775:60): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/opt/eset/esets/lib/libesets_pac.so" pid=7038 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 2801.502470] audit: type=1400 audit(1541728825.775:61): apparmor="DENIED" operation="open" profile="/usr/sbin/cups-browsed" name="/opt/eset/esets/lib/libesets_pac.so" pid=7038 comm="cups-browsed" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 2801.560780] audit: type=1400 audit(1541728825.831:62): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/opt/eset/esets/info/pkgid" pid=7055 comm="cups-exec" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 2801.560786] audit: type=1400 audit(1541728825.831:63): apparmor="DENIED" operation="connect" profile="/usr/sbin/cupsd" pid=7055 comm="cups-exec" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@2F746D702F65736574732E736F636B0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" peer="unconfined"
[ 2801.562319] audit: type=1400 audit(1541728825.835:64): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/opt/eset/esets/info/pkgid" pid=7061 comm="cups-exec" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 2801.565368] audit: type=1400 audit(1541728825.839:65): apparmor="DENIED" operation="connect" profile="/usr/sbin/cupsd" pid=7061 comm="cups-exec" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@2F746D702F65736574732E736F636B0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" peer="unconfined"
[ 2801.567142] audit: type=1400 audit(1541728825.839:66): apparmor="DENIED" operation="open" profile="/usr/sbin/cupsd" name="/etc/opt/eset/esets/info/pkgid" pid=7062 comm="cups-exec" requested_mask="r" denied_mask="r" fsuid=0 ouid=0
[ 2832.633700] kauditd_printk_skb: 11 callbacks suppressed
[ 2832.633702] audit: type=1400 audit(1541728856.907:78): apparmor="DENIED" operation="connect" profile="/usr/sbin/cupsd" pid=7031 comm="cupsd" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@2F746D702F65736574732E736F636B0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" peer="unconfined"
[ 3596.290036] audit: type=1400 audit(1541729620.555:79): apparmor="DENIED" operation="connect" profile="/usr/sbin/cupsd" pid=7031 comm="cupsd" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@2F746D702F65736574732E736F636B0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" peer="unconfined"
[ 3627.322225] audit: type=1400 audit(1541729651.586:80): apparmor="DENIED" operation="connect" profile="/usr/sbin/cupsd" pid=7031 comm="cupsd" family="unix" sock_type="stream" protocol=0 requested_mask="send receive connect" denied_mask="send connect" addr=none peer_addr="@2F746D702F65736574732E736F636B0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000" peer="unconfined"
[ 4078.994741] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
edson@edson-p6540br:~$ 
 

 

Serial.com

  • Most Valued Members
Posted

@Serial.com, Most of these problems are caused by AppArmor , ESET v4 is not compatible with AppArmor/SELinux

I've tried to test things here and there , ESET still does do it's job while AppArmor is enabled (I didn't try with AppArmor disabled) , but it encounters lot of errors , and while scanning AppArmor will prevent ESET from accessing most files as far as I have noticed.

I don't know if there is a workaround for AppArmor to allow ESET , but I don't want to disable it and I don't want to remove ESET.

Posted (edited)

Hello @Rami 

Thanks for the clarifications.

I also have the same opinion as yours.

Eset needs to do her homework and see how to solve it.

Serial.com

Edited by Serial.com
  • Most Valued Members
Posted

It seems that ESET Linux home edition isn't being used by that much users so it's not top priority like Windows , but I would love to see the linux version getting updated even though that ESET engines do get updated but still problem persist in it , and it's missing lot of features that v12 does have.

But still I will be keeping v4 for my Linux.

  • Most Valued Members
Posted

Indeed as I don't want to start messing with another AV and start to get used to everything in it etc , so I prefer to stay with ESET and wait for fixes.

Posted

Hello Technical Support


In the case of laymen, such as myself, we aim to buy the product and install it for our security, where we expect the product of the message, without much deluge.

In the case of the AV in question, it could not collaborate in this matter, through an information to the user saying that such procedure (Apparmor Deactivation) must be performed at the moment the AV is being installed so that it is arranged to deactivate the Apparmor , or does the software itself perform this procedure more simply, through internal commands embedded in the package?

The libc6: i386 are warned and because Apparmor or SEliux we are not warned? Should not they make life easier for users with at least one more warning?

On your site there is not, or at least I did not see the information on how to do this procedure in disabling or removing Apparmor. The only situation I encountered was this at the following link: https://bit.ly/2PUllgn.


The Tip for Developers for new upgrades of this excellent product is thank you for a return of cooo correctly disable the apparmor for correct installation of Eset for Linux.


Edson Santos

  • Most Valued Members
Posted (edited)

It's not recommended to disable SELinux / AppArmor because the Security of the system relies on them, what makes me afraid that ESET is not working properly and I might be infected in one way or the another

I see that you have opened a bug report in Ubuntu Launchpad , but I am afraid they won't do much help because it's not their problem , it's ESET's problem

I don't know if I should move on to Sophos as they do support Linux or I should stay with ESET because the license is still there , but I don't know if it's doing it's job properly

The AV engines do get updated , but v4 is about 8-9 years old now, and mostly if I am not mistaken , it doesn't do its job properly because it cannot reach many areas.

Edited by Rami
Posted

Hello Rami

Faced with this situation we have to ask for reimbursement to Eset for the purchase of a lagged and inefficient product, wait for the good will of the team to find a solution to this problem or leave for another Av that meets the needs of Linux users.

What is more worrying is the unwillingness to rerun or debrief about it.

Serial

  • Most Valued Members
Posted (edited)

Hello Serial ,

I understand your worries , I have the same because I don't want to lose that machine because of a malware or something like this and in the same time I still don't know what to do if it's safe to stay with ESET v4 or I should move to something else

If it's possible for the devs or anyone from ESET team to tell us that it's secure to stay with v4 or atleast update us about any updates that might be coming towards the linux version , the other options are free AVs and supporting Linux , and ESET is paid AV and still not supporting the Linux.

It worries me to think that the AV that is running to protect me is not really protecting me because it's not compatible with the system protection.

@Marcos , @Peter Randziak - A reply would be much appreciated , so If we aren't protected , it would be sad to be infected while running v4 , if it's not safe please advice and tell us to stop using it or keep using it it's okay.

Edited by Rami
  • 3 weeks later...
Posted (edited)

When will the Eset technicians compromise with these "error" messages mentioned by the AV in question?

Quando haverá comprometimento dos técnicos da Eset para com estas mensagens de "erro" mencionados pelo AV em questão?

29/11/2018 08:44:10    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
29/11/2018 08:43:39    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
29/11/2018 07:45:50    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
29/11/2018 07:45:19    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
29/11/2018 06:47:30    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
29/11/2018 06:46:59    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
29/11/2018 06:46:23    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
29/11/2018 06:46:03    Media control access    Cannot unblock removable media (org.freedesktop.udisks2.filesystem-mount)    
29/11/2018 00:50:12    ESET Daemon    Cannot read from socket: Connection reset by peer    
29/11/2018 00:50:11    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
29/11/2018 00:33:26    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
29/11/2018 00:32:55    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
29/11/2018 00:32:21    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
29/11/2018 00:32:03    Media control access    Cannot unblock removable media (org.freedesktop.udisks2.filesystem-mount)    
28/11/2018 14:22:03    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
28/11/2018 13:52:42    Preload library access control    Unknown opened directory on descriptor 173    
28/11/2018 13:52:42    Preload library access control    Unknown opened directory on descriptor 294    
28/11/2018 13:52:42    Preload library access control    Unknown opened directory on descriptor 173    
28/11/2018 13:52:42    Preload library access control    Unknown opened directory on descriptor 294    
28/11/2018 13:52:42    Preload library access control    Unknown opened directory on descriptor 173    

...

16/11/2018 09:06:23    ESET Daemon    Error updating Antivirus modules: An error occurred while downloading update files.    
16/11/2018 09:06:09    Media control access    Cannot unblock removable media (org.freedesktop.udisks2.filesystem-mount)    
16/11/2018 01:52:15    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
16/11/2018 01:49:29    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
16/11/2018 01:48:57    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
16/11/2018 00:51:09    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
16/11/2018 00:50:37    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
16/11/2018 00:01:33    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
16/11/2018 00:01:02    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
16/11/2018 00:01:02    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
16/11/2018 00:01:01    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
16/11/2018 00:01:01    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
15/11/2018 23:52:49    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    

...

15/11/2018 20:56:12    Media control access    Cannot unblock removable media (org.freedesktop.udisks2.filesystem-mount)    
15/11/2018 20:54:59    ESET Daemon    Cannot read from socket: Connection reset by peer    
15/11/2018 20:54:58    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    
15/11/2018 20:54:46    Preload library access control    Cannot connect to /tmp/esets.sock: Permission denied    

 

Edited by Marcos
Log shortened
  • Most Valued Members
Posted (edited)

I do believe that Linux version is not top priority for ESET Team , The workaround that you can do is trying to configure AppArmor to work along ESET or disable it(NOT RECOMMENDED), or wait for an update by ESET Team.

I did try to configure the AppArmor for ESET , which asks for permission libesets.pac , but that's not all , there are still other things that should be a allowed in order for ESET to work properly , but an explanation by the ESET team would help.

Beware that the log of ESET 4 Linux can grow up to a big size log files , because of the events log which every while will log some errors and will keep doing that if the system is running.

Edited by Rami
Guest
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...